Forklift Chains

Forklift Chain - The life of the forklift lift chains can actually be prolonged with proper maintenance and care. Lubricating correctly is a great method to prolong the capability of this forklift component. It is essential to apply oil every so often making use of a brush or whatever lube application device. The volume and frequency of oil application must be adequate in order to prevent any rust discoloration of oil in the joints. This reddish brown discoloration usually signals that the lift chains have not been correctly lubricated. If this condition has occurred, it is really imperative to lubricate the lift chains at once.

It is typical for a few metal to metal contact to occur through lift chain operation. This can cause parts to wear out in the long run. The industry standard considers a lift chain to be worn out if three percent elongation has occurred. To be able to stop the scary chance of a disastrous lift chain failure from occurring, the manufacturer greatly recommends that the lift chain be replaced before it reaches 3 percent elongation. The lift chain gets longer due to progressive joint wear that elongates the chain pitch. This elongation can be measured by placing a certain number of pitches under tension.

Another factor to ensuring correct lift chain maintenance is to check the clevis pins on the lift chain for signs of wear and tear. The lift chains have been put together so that the tapered faces of the clevis pin are lined up. Normally, rotation of the clevis pins is commonly caused by shock loading. Shock loading happens if the chain is loose and then all of a sudden a load is applied. This causes the chain to go through a shock as it 'snaps' under the load tension. With no good lubrication, in this particular case, the pins can rotate in the chain's link. If this particular scenario occurs, the lift chains must be replaced instantly. It is imperative to always replace the lift chains in pairs to be able to ensure even wear.


Click to Download the pdf

Forklift Parts

Skytrak Attachment

Skytrak Attachments - SkyTrak comes from a top-selling telehandler which is among the most recognized in the industry, providing a durable and operator friendly solution. There are 3 steering modes outfitted on every model and also comes along with a Cummins engine. SkyTrak telehandlers are able to provide the maneuverability and the power needed so as to handle crowded and...

More

---

Daewoo Forklift Parts

Daewoo Forklift Part - During the month of March of the year 1967, the Daewoo Group was started by Kim Woo-Jung. He was the son of the Provincial Governor of Daegu. He first graduated from the Kyonggi High School and afterward studied at Yonsei University in Seoul where he finished with an Economics Degree. Daewoo became among the Big Four...

More

---

Knuckle Boom Lift Part

Parts for Knuckle Boom Lift - Construction businesses often should lift, transport and carry very heavy cargo. Cargo sizes from five to ten tons are not unheard of and this should be completed by using reliable and strong equipment that can pick up the weight and support itself. To resolve these problems, very huge Boom Trucks were invented in order...

More

---

Fork Slot Truss Jibs

Fork Slot Truss Jibs - Jib attachments are made to be utilized on rough terrain straight-mast forklifts, industrial lift trucks, or on extendable-reach lift trucks. Forklift jib cranes fit onto the forklift by inserting two forks into the fork pockets. The back of the jib crane then seats towards the rear of the fork and a security chain wraps the...

More

---

Fork Mounted Truss Booms

Fork Mounted Truss Booms - For lots of businesses, a really useful piece of equipment is the adjustable boom forklift which could lift and move vary heavy objects all-around. The lift truck device is a really helpful tool on its own, outfitted along with powered forks on the front of the machine. These prongs could be slid under really heavy...

More

---

Manitou Forklift Attachments

Attachment for Manitou Forklifts - Manitou is a well established business who specializes in the production of forklifts, skid steer loaders, telehandlers and a range of other types of heavy construction machine. In regard to forklifts, there are numerous models obtainable being made by well established businesses to be able to suit the requirements of the mining, industrial and agricultural...

More

---

Komatsu Forklift Part

Komatsu Forklift Part - Komatsu Forklift U.S.A. Inc., an affiliate of the Komatsu Ltd. family, has a positive reputation for building robust and dependable lift trucks. They are known globally as a business who has a proud heritage and who maintains a standard of superiority in equipment production and intention. Komatsu Forklift U.S.A., Inc., a branch of Komatsu Forklift Co.,...

More

---

Hyster Forklift Parts

Hyster Forklift Part - Hyster is globally renowned as an industry leader in the forklift manufacturing business. However, it began as a producer of lifting equipment as well as winches. Most of its production was concentrated in the Pacific Northwest and dealt mostly with the wood and logging industry. A couple years after the 1st forklift trucks were invented Hyster...

More

---